전임교원


강호종

강호종 공과대학 고분자시스템공학부자세히 보기

조준한

조준한 공과대학 고분자시스템공학부자세히 보기

김오영

김오영 공과대학 고분자시스템공학부자세히 보기

진병두

진병두 공과대학 고분자시스템공학부

자세히 보기

황석호

황석호 공과대학 고분자시스템공학부
자세히 보기

  • 031-8005-3588
김응건

김응건 공과대학 고분자시스템공학부자세히 보기

이동현

이동현 공과대학 고분자시스템공학부자세히 보기

  • 031-8005-3590
오준균

오준균 공과대학 고분자시스템공학부자세히 보기

구병진

구병진 공과대학 고분자시스템공학부

자세히 보기

이동현

김세영 공과대학 고분자시스템공학부

자세히 보기

박민수

박민수 공과대학 고분자시스템공학부자세히 보기

홍세흠

홍세흠 공과대학 고분자시스템공학부자세히 보기

강호종 사진

강호종 | 공과대학 고분자시스템공학부

  • 직급:
    명예교수

교수소개

고분자 소재는 의식주와 같은 일상 생활로부터 전자/생명/나노/환경과 같은 첨단 공학 영역에 까지 널리 사용되는 신소재이다. 이러한 소재를 이용하여 인간이 필요로하는 최종 제품을 만들기 위해서는 고분자 가공이라는 과정이 필연적이다. 따라서 본 연구실은 IT, BT, NT, ET에 사용되는 고분자 소재의 가공기술의 개발과 가공에 의한 이들 소재의 물성 변화 대하여 중점적으로 연구하고 있으며 그 결과, 이 분야 관련 80여편의 국내외 논문이 발표되었다. 세부연구 분야로는 첫째, 고분자의 유변특성을 기초로하여 고분자 필름/섬유 제조를 위한 압출 가공기술 개발을 들 수 있다. 특히 전자/생명/환경 공학에 많이 사용되는 고기능, 고내열성 및 바이오 필름/섬유소재에 대한 가공연구가 중점적으로 수행되고 있다. 둘째, 생명/의료용 고분자의 가공기술 개발을 들 수 있다. 조직공학용 생체기능소재 가공, 나노공학을 이용한 바이오 친화성 소재 가공, 환경공학의 적용을 위한 환경친화성 고분자소재 가공에 대한 연구가 수행되고 있다. 셋째, 전자공학 고분자 소재 분야로 광전소자의 유연 기판 소재, 하드디스크 혹은 광디스크와 같은 데이타 저장 장치에 필수적으로 필요한 고분자 윤활소재의 개발 및 이들의 새로운 미래첨단 저장 장치의 적용을 들 수 있다. 아울러 고용량 데이타 전송에 필요한 광 섬유소재의 합성기술 및 이의 가공 기술에 대한 연구도 함께 진행되고 있다. 넷째, 항공/자동차 소재로 많이 사용되는 고분자 복합소재의 고 기능화를 위한 가공특성 연구를 수행하고 있다.

학력

  • [1982] 학사 연세대학교 / 화학공학과
  • [1985] 석사 Univ. of Tennessee - Knoxville / 고분자공학
  • [1989] 박사 University of Akron / 고분자공학

주요연구분야

광전소자용 고분자 유연기판 가공
의료용 및 생분해 고분자 가공
정보저장용 고분자 신소재 가공
항공/자동차용 고내열/고강도 고분자 복합소재 가공

컨설팅 가능 분야

-고분자 압출/사출/몰딩 가공기술
-고분자 필름 및 고분자 섬유 가공기술
-생분해성 고분자 가공
-고분자 복합소재 가공
-정보저장용 고분자 윤활제

연구업적

  • 연구보고서[20110930] 내스크래치성 강화 고광택 폴리아마이드 특수 컴파운드 소재개발
  • 일반논문[20231001] The efect melt processing temperature on the isothermal crystallization of poly(3‑hydroxybutyrate‑co‑4‑hydroxybutyrate)
  • 일반논문[20230501] Isothermal crystallization of poly[3-hydroxybutyrate-co-4-hydroxybutyrate] mixtures
  • 일반논문[20221125] Orientation Characteristics of Nylon 6/Polyketone Blends with Chain Extender
  • 일반논문[20221125] Effect of Thermal Degradation on Physical Properties of Poly(3-hydroxybutyrate-co-4-hydroxybutyrate)
  • 일반논문[20220925] Non-isothermal Crystallization of Poly(3-hydroxybutyrate-co-4-hydroxybutyrate)
  • 일반논문[20220925] Effect of 4-Hydroxybutyrate Content on Physical Properties of Poly(3-hydroxybutyrate-co-4-hydroxybutyrate)
  • 일반논문[20220515] Supercritical CO2 Foaming of Poly(3-hydroxybutyrate-co-4-hydroxybutyrate)
  • 일반논문[20220501] The Modification of Poly(3-Hydroxybutyrate-co-4-hydroxybutyrate) by Melt Blending
  • 일반논문[20211003] Enhancement of the Processability and Properties of Nylon 6 by Blending with Polyketone
  • 일반논문[20210821] Synthesis and Characterization of Vinyl-Terminated Poly(dimethyl-co-methylvinyl)siloxane by Ring Opening Polymerization
  • 일반논문[20210325] Development of Polypropylene Powder for SLS 3-D Printing by Solution Precipitation Method
  • 일반논문[20210222] Compression Molding of Thermoplastic Polyurethane Foam Sheets with Beads Expanded by Supercritical CO2 Foaming
  • 일반논문[20200930] Synthesis and Characterization of Vinyl Terminated Poly(vinyl methyl Siloxane) by Ring Opening Polymerization
  • 일반논문[20200925] Effect of Physical Structure of Thermoplastic Polyurethane on the Supercritical CO2 Foaming
  • 일반논문[20200331] The Physical Properties of Maleic Anhydride Polypropylene Film with Nano Cellulose Fiber
  • 일반논문[20200131] Thermal Shrinkage Characteristics of Uniaxially Oriented Polyvinyl Alcohol Films with Cellulose Fibers
  • 일반논문[20190930] Stability and Electrical Conductivity of Copper-based Solid-state Conductive Inks and Their Application for Flexible Electrodes
  • 일반논문[20190531] Enhancement of Dimensional Stability of Poly(vinyl alcohol) Films by Cellulose Nano Fibers
  • 일반논문[20181130] Effect of Homo Polypropylene Having Low Melt Viscosity on Processing Characteristics and Structural Development of Random Polypropylene Films
  • 일반논문[20181130] Characteristics of Organic-Inorganic Hybrid Material for SLS 3-D Printing
  • 일반논문[20180930] Effect of Laser Scanning Speed on the Formation of Sintered Layer in SLS 3-D Printing
  • 일반논문[20180501] Synthesis and Coating Characteristics of Branched Polyorganosiloxane
  • 일반논문[20180101] Synthesis and Characterization of Vinyl Terminated Poly(vinylmethyl-dimethylsiloxane) Copolymer
  • 일반논문[20180101] Effect of Crystallinity on Characteristics of Breathable Polypropylene Film by Laser Ablation
  • 일반논문[20171101] Enhancement of Impact Strength in Acrylate with Siloxane for SLA 3-D Printing
  • 일반논문[20170901] Effect of Crystallization Behavior on Processing Characteristics of SLS 3-D Printing
  • 일반논문[20170501] Fabrication of Poly(ether imide) Microspheres for Selective Laser Sintering (SLS) 3D Printing Process
  • 일반논문[20170501] Effect of 2-Hydroxyethyl Acrylate on Physical Properties of Optically Clear Resin
  • 일반논문[20170301] Coating Characteristics of 2-Ethylhexyl Acrylate/2-Hydroxyethyl Acrylate Optically Clear Resin
  • 일반논문[20170301] Effects of Acrylic Monomers and Oligomer Contents on the Silk Screen Printability and Adhesion of UV Curing Acrylic Adhesive
  • 일반논문[20170101] Polymer Powder Sintering by CO2 Laser for 3D Printing
  • 일반논문[20161101] Modification of Nano Silica for Multi-functional Organic/Inorganic Hybrid Hard Coating
  • 일반논문[20160525] Modified Nano Silica by Acrylate for High Performance Hard Coating
  • 일반논문[20160325] Enhancement on the Mechanical Properties of Natural Gluten Film
  • 일반논문[20150901] 셀룰로오스 보습제가 시멘트 몰탈의 기계적 특성에 미치는 영향
  • 일반논문[20150701] 다단 굴절률을 갖는 다층 필름의 광 투과 특성
  • 일반논문[20150525] 페닐기 함유 열경화성 폴리유기실록산 코팅제 특성
  • 일반논문[20141130] Multi Acrylate기를 갖는 Polydimethylsiloxane 변성 Urea 코팅액의 제조와 그 특성
  • 일반논문[20140925] 퍼프로로폴리에테르 유도체의 루이스 산 분해특성
  • 일반논문[20140925] Polyvinyl Alcohol/Polyamide-epichlorohydrin 복합 지력 증강제에 의한 종이 특성 향상
  • 일반논문[20140530] 실리콘 변성 에폭시 언더코팅액 물성 연구
  • 일반논문[20140430] 실리콘 변성 에폭시 언더코팅액의 제조와 물성
  • 일반논문[20140330] Acrylate기를 갖는 Polydimethylsiloxane계 코팅 액의 제조와 그 특성
  • 일반논문[20131101] Physical Properties of Poly(vinyl alcohol) with Polyamide-epichlorohydrin as a Wet Strength Additive for Paper
  • 일반논문[20131101] Effect of Chain Orientation on the Characteristics of PEN Flexible Substrate
  • 일반논문[20130901] Manufacturing of Flexible Patterned Cover Film for Solar Cell by Solution Coating
  • 일반논문[20130525] 폴리카보네이트 필름 표면 처리가 증착 SiOx 베이어층 접착에 미치는 영향
  • 일반논문[20121130] 에틸렌-테트라플르오르에틸렌 공중합체의 비등온 결정화 거동
  • 일반논문[20121130] 무기 필러가 유연기판용 폴리에틸렌나프탈레이트 필름 치수안정성에 미치는 영향
  • 일반논문[20120731] 나일론6/이오노머 Semi IPN의 몰드-인-칼라 수지 특성 연구
  • 일반논문[20120531] 저온 E Beam 증착 공정으로 제조된 폴리에테르설폰 유연기판용 ITO필름 특성 연구
  • 일반논문[20120331] 라미네이트 강판용 폴리우레탄 접착제의 접착거동
  • 일반논문[20111130] 폴리(에틸렌 테레프탈레이트)/폴리(에틸렌 나프탈레이트) 공중합체의 유연기판 특성
  • 일반논문[20110701] Enhanced Photo-Thermal Stability of Modified PFPE Lubricants Under Laser Beam Exposure
  • 일반논문[20110625] Photo Oxidative Degradation of Perfluoropolyether Lubricant for Data Storage
  • 일반논문[20110531] 상호에스테르 교환반응이 폴리(에틸렌 테레프탈레이트)/폴리(에틸렌 나프탈레이트) 블렌드 유연기판 특성에 미치는 영향
  • 일반논문[20110331] 단량체의 종류에 따른 폴리(에틸렌 나프탈레이트) 공중합체의 물성 연구
  • 일반논문[20110101] 천연 염료에 의한 폴리(비닐 알코올)의 가교 특성
  • 일반논문[20101125] 폴리(비닐 알코올) 접착제가 LCD편광판의 치수안정성에 미치는 영향
  • 일반논문[20100501] 트리아세틸 셀룰로오스 필름의 용액가공에 의한 구조변화
  • 일반논문[20100501] 주사슬 배향이 폴리에테르설폰 필름의 광학 특성 및 치수안정성에 미치는 영향
  • 일반논문[20100325] 필름 가공조건이 트리아세틸 셀룰로오스 필름의 치수안정성에 미치는 영향
  • 일반논문[20090301] Crosslinking Characteristics of Ethylene Vinyl Acetate Copolymer by the Structure of Crosslinking Agents
  • 일반논문[20080301] Influence of Uniaxial Extension on the Mechanical Properties of PET and PEN Films
  • 일반논문[20080228] A Study of Nano-Mechanical and Macro-Mechanical Properties of Ethylene Vinyl Acetate
  • 일반논문[20071130] The Effect of UV Stabilizer on the Photo Degradation of Perfluoropolyether Lubricants Used in Hard Disk
  • 일반논문[20070731] 컴퓨터 하드디스크 윤활제로 사용되는 Perfluoropolyether의 분해거동(Degradation Characteristics of Perfluoropolyether Lubricant for Computer Hard Disk)
  • 일반논문[20070131] 재활용 고밀도 폴리에틸렌의 가교에 의한 물성 향상 연구(Enhancement of Physical Properties in Partially Crosslinked Waste High Density Polyethylene)
  • 일반논문[20060331] Tubular Film Extrusion Stability of Metallocene Linear Low Density Polyethylene
  • 일반논문[20060331] 상호에스테르 교환반응이 폴리(부틸렌 테레프탈레이트)/폴리(에틸렌 테레프탈레이트) 블렌드 물성에 미치는 영향
  • 일반논문[20060131] The Characteristics of Poly(ethylene naphthalate)/Poly(butylene terephthalate) Blends
  • 일반논문[20051130] Processing Characteristics of Nylon 6 by Controlling the Melt Viscosity
  • 일반논문[20050930] Processability Enhancement in Melt Processing of Poly(ethylene naphthalate)
  • 일반논문[20050810] Mechanical Properties of Polymeric Dental Restorative Composites Filled with Silica Treated by Heat at Various Temperature
  • 일반논문[20050731] Crosslinking Characteristics of High Density Polyethylene by Reactive Melt Processing
  • 일반논문[20050301] Preparation of Poly(L-lactic acid) Scaffolds by Melt Extrusion Foaming
  • 일반논문[20041030] Studies on the Physical Properties of Fullerene-Modified Polystyrenes
  • 일반논문[20040531] Effect of Lubricants on the Physical Properties of Poly(butylene terephthalate)
  • 일반논문[20040131] Surface Characteristics of Silicon Substrates Coated with Self-assembled Mono-layers
  • 일반논문[20040131] Structure Development of Uniaxially Drawn Poly(trimethylene terephthalate)/Poly(ethylene terephthalate) Blends
  • 일반논문[20031210] Preparation of Poly(lactic acid) Scaffolds by the Particulate Leaching
  • 일반논문[20031130] Surface Characteristics of Silicon Substrates Coated with Octadecyltrichlorosilane
  • 일반논문[20030930] Structure Development in Drawn Poly(trimethylene terephthalate)
  • 일반논문[20030730] Crystallization Behavior of Poly(lactic acid)/Poly(caprolactone) Blends
  • 일반논문[20030130] Thermal Characteristics of Multiply Alkylated Cyclopentane and Perfluoropolyether
  • 일반논문[20021010] Kinetics on Curing of Silicone Modified PU Sealant
  • 일반논문[20020930] Rheological Properties of Polyurethane Modified with Polyorganosiloxane
  • 일반논문[20020210] Study on the Degradation Behavior of Branched Perfluoropolyether
  • 일반논문[20011210] Study on the Crystallization Behavior of EVA/Petroleum Resin Blends as a Hot Melt Adhesive
  • 일반논문[20011130] Crystallization Characteristics of Metallocene Low Density Polyethylene
  • 일반논문[20011130] Crystallization Characteristics of Metallocene Low Density Polyethylene/Low Density Polyethylene Blends
  • 일반논문[20010701] Preparation and Properties of Polyurethane Modified with Polyorganosiloxane Sealant
  • 일반논문[20010430] Polyorganosiloxane 변성 폴리우레탄 Hybrid의 합성과 그 특성
  • 일반논문[20010228] Effect of Phosphazene-Type Additive X-100 on the Tribological Performance of Z-DOL at the Head/Disk Interface
  • 일반논문[20001230] 컴퓨터 하드디스크 윤활제로 사용되는 perfluoropolyethers/cyclotriphosphazene(X-100)혼합물의 분해 특성에 대한 연구
  • 일반논문[20000930] Poly(ethylene naphthalate)/Poly(ε-carprolactone) 용융 블렌딩에 의하여 발현된 공중합체의 Randomness에 관한 연구
  • 일반논문[20000930] 용융 가공에 의해 발현된 열 이력이 폴리락틱산 섬유의 기계적 물성에 미치는 영향
  • 일반논문[20000730] 핫 멜트 접착제로 사용되는 비 결정성 올레핀 수지/석유수지 블렌드의 열적 성질 및 접착성에 관한 연구
  • 일반논문[20000530] Synthesis and Charateristics of Polyurethane Modified with Polyorganosiloxane
  • 일반논문[20000131] Solvent 용접에 의한 무정형 고분자 계면의 접착강도 변화에 관한 연구
  • 일반논문[19991201] The use of phosphazene additives to enhance the performance of PFPAE lubricants
  • 일반논문[19991101] 사용 환경조건이 에폭시/탄소섬유 복합소재 전기전도도에 미치는 영향
  • 일반논문[19990915] A study of phase separation characteristics of perfluoropolyether/phosphazene(X-1P)lubricant mixtures on hard disk surfaces
  • 일반논문[19990915] 탄소섬유 방향성이 에폭시/탄소섬유 복합재료의 전기전도도에 미치는 영향
  • 일반논문[19990707] 전자파 반사재료로 사용되는 탄소섬유/에폭시 복합재료의 적층 탄소섬유 방향성이 마찰특성에 미치는 영향
  • 일반논문[19990331] Tribological Study of Phosphagene-Type Additives in Perfluoropolyether Lubricant for Hard Disk Application
  • 일반논문[19990331] The Use of Cyclic Phosphazene Additives to Enhance the Performance of the Head/Disk Interface
  • 일반논문[19990325] 인산염이 Poly(ethylene naphthalate)/Poly(ethylene terephthalate)블렌드의 열적특성에 미치는 영향
  • 일반논문[19990325] Poly(ethylene 2,6-naphthalate)/Poly(ethylene terephthalate)블렌드 필름의 자외선 흡수특성에 관한 연구
  • 일반논문[19990131] 첨단 컴퓨터 하드디스크 윤활제로 사용되는 Perfluoropolyethers/Phosphazene Mixtures의 분해 특성
  • 일반논문[19990131] 이중 블록 공중합체를 이용한 비상용성 고분자 접합면의 접착강도에 관한 연구
  • 일반논문[19981130] Poly(ethylene terephthalate)/Poly(ethylene 2,6-naphthalate) 블렌드 섬유의 연신에 의한 물성 변화
  • 일반논문[19980930] Cellulose/NMNO Dope의 열분해에 의한 셀룰로오스 섬유 물성 변화에 대한 고찰
  • 일반논문[19980930] Cellulose/NMNO 용액에서의 Cellulose 결정화 거동
  • 일반논문[19980831] 폴리올에 함유된 수분이 폴리우레탄 물성에 미치는 영향
  • 일반논문[19980731] Poly(ethylene naphthalate)/Polycaprolactone 블렌드의 생분해성 고찰
  • 일반논문[19980531] 상호에스테르 교환반응 촉매가 Poly(ethylene naphthalate)/Poly(ε-caprolactone)블렌드의 반응 용융가공에 미치는 영향
  • 일반논문[19970901] 접합조건에 따른 무정형 동종고분자 접합면의 접착강도에 관한 연구
  • 일반논문[19970202] 고기능 고분자 복합재의 고상계면 현상에 대한 연구(1)
  • 일반논문[19960731] 용액가공 Poly(vinylidene fluoride) 필름의 등온결정화에 따른 결정변화에 대한 연구
  • 일반논문[19960331] Poly(ethylene2,6-naphthalate)/Poly(ε-caprolactone)블렌드의 열적특성에 관한 연구
  • 일반논문[19940331] 폴리에터에터케톤 필름의 용매확산 현상과 용매확산에 의한 결정화
  • 일반논문[19940131] 용매확산에 의한 Poly(Etherimide)/탄소섬유 복합재료의 부식성에 관한 연구
  • 일반논문[19931101] Poly(ether imide)/Carbon Fiber 열가소성 복합재료의 수분 흡수에 관한 연구
  • 일반논문[19920101] Danamics and Stability of Double Bubble Film Extrusion
  • 일반논문[19910103] 고분자 필름의 가공
  • 일반논문[19910102] Measurement of Processing Variable in Manufacturing of Thermoplactics Composites
  • 일반논문[19900102] A Double Bubble Tubular Film Process to Produce Bixailly Oriented PPS Films
  • 일반논문[19900101] Single and Dubble Tubular Film Extrusion of Polyethylene Terephthalate
  • 일반논문[19890501] Structure Developement and Dynamics in Double in Bubble Tubular Film Processing
  • 일반논문[19870101] A Study of the Mechanisms of Haze and Surface Roughness in Tubular Film Extrusion
  • 일반논문[19860101] Orientation and Residual Stress Distribution in Thick Melt Spun Polystyrene and Polycarbonate Filament
  • 저서/역서[19930830] 고분자실험
  • 저서/역서[19920101] 일반화학
  • 지식재산권[20180516] SLS 3D 프린팅용 유무기 하이브리드 조성물 및 이의 제조 방법
  • 지식재산권[20180516] 3-D 프린팅용 자외선경화 수지
  • 지식재산권[20180419] 가지형 폴리올가노실록산 및 이를 포함하는 자외선 경화형 하드 코팅 조성물
  • 지식재산권[20170725] 폴리오르가노실록산, 이를 포함하는 코팅제 조성물 및 코팅층
  • 지식재산권[20170525] 3-D 프린팅용 자외선경화 수지
  • 지식재산권[20160712] 전자부품 포장용 다층필름(AN COATING SOLUTION USING PREVENTING BREATHABLITY FILM FOR ELECTRIONIC PART)
  • 지식재산권[20160504] 아크릴레이트계 코팅제의 첨가물, 광경화형 코팅 조성물, 및 그 제조방법
  • 지식재산권[20140515] 폴리오가노실록산 변성 우레아-아크릴레이크 화합물의 제조방법, 그에 의해 제조되는 폴리오가노실록산 변성 우레아-아크릴레이크 화합물 및 이를 포함하는 코팅조성물
  • 지식재산권[20140422] 비닐계 실리콘 화합물의 광경화성 코팅재 조성물
  • 지식재산권[20140415] 폴리실록산 변성 에폭시 하이브리드 화합물을 포함하는 코팅 조성물의 제조 방법
  • 지식재산권[20130520] 위상차 필름용 조성물, 위상차 필름 및 이의 제조방법
  • 지식재산권[20110523] 나노다이아몬드를 포함하는 에틸렌비닐아세테이트 조성물 및 이의 제조방법
  • 지식재산권[20110228] 초음파 분사에 의한 광전소자용 다층 유기박막의 제조방법
  • 지식재산권[20101028] 저용융점도 축중합 고분자 및 이의 제조 방법
  • 지식재산권[20070226] 자외선-가시광선 스펙트럼을 이용한 김치냉장고의 김치숙성 무선제어 시스템
  • 지식재산권[20061019] 굴절율을 측정하여 중합체의 중합 전화율을 제어하는 방법 및 장치
  • 지식재산권[20060518] 폴리비닐알코올을 이용한 무독성의 pH 인지제
  • 지식재산권[19971104] 셀룰로오스와 3급 아민옥사이드의 펠렛상 혼합분말과 셀룰로오스 방사용액 및 그의 제조방법
  • 지식재산권[19970711] 셀룰로오스와 3급 아민옥사이드의 펠렛상 혼합분말과 셀룰로오스 방사용액 및 그의 제조방법
  • 지식재산권[19930101] 셀룰로오스와 3급 아민옥사이드의 펠렛상 혼합분말과 셀룰로오스 방사용액 및 그 제조
  • 학술발표[20140411] 변성 실리카 첨가에 의한 고경도 하드코팅의 물성 변화
  • 학술발표[20130412] 카르복실기 함유 폴리바이닐알코올의 물성 연구
  • 학술발표[20130411] 보습 증강제로 사용되는 셀룰로오스의 수산기 치환도가 시멘트 몰탈의 기계적 특성에 미치는 영향
  • 학술발표[20130411] 아크릴레이트 언더코팅이 유연기판용 폴리에틸렌나프탈레이트 필름 표면 거칠기에 미치는 영향
  • 학술발표[20121212] Polyorganosiloxane modified acrylate for advanced hard coating material
  • 학술발표[20121212] Inorganic Filler Reinforced Poly(ethylene naphthalate)Film as a Flexible Substrate
  • 학술발표[20110509] Dimensional Stability of PET/PEN Copolymers as a Flexible Substrate
  • 학술발표[20110508] Crystallization Behavior of Semi Interpenetrating Network Ionomer
  • 학술발표[20110408] ETFE(ethylene-tetrafluoroethylene)의 결정화 거동
  • 학술발표[20110407] HPC(hydroxypropyl cellulose)를 이용한 TAC(triacetyl cellulose) 필름의 위상차 보상기능
  • 학술발표[20100806] Effect of Chain Orientation on the Optical Properties of Triacetyl Cellulose Film
  • 학술발표[20100805] Update on HAMR Lubricant Development & Tribological Investigations
  • 학술발표[20100518] Evaluation of Natural Flavonoids as Crosslinking Agents for Polyvinyl Alcohol
  • 학술발표[20100408] Effect of Chain Orientation on the Optical Properties and Dimensional Stability of Polyethersulfone Film
  • 학술발표[20091210] Effects of Multilayer Structures and Interfacial Engineering for the Performance of Organic Photovoltaic Device
  • 학술발표[20090622] EFFECT OF TRIACETYL CELLULOSE FILM SURFACE HYDRATION ON THE ADHESION STRENGTH TO POLYVINYL ALCOHOL (PVA) FILM
  • 학술발표[20090410] TAC(Triacetate cellulose)의 첨가제에 따른 물성 비교
  • 학술발표[20090410] Hgh perfomace Polyester blend for Flexible Substrate
  • 학술발표[20080504] Effect of Norbornene Content on the Physical Properties of Cyclo Olefin Copolymers
  • 학술발표[20071024] The effect of UV stabilizer on the photo degradation of perfluoropolyether lubricant used in hard disk
  • 학술발표[20071012] Characteristics of Cyclo olefn Copolymer
  • 학술발표[20071012] The Effect of Interfacial Strength on the Light Refraction in Multi-step Plastic Optical Fiber
  • 학술발표[20071012] A Study on the Biocampatibility of PLA/Si-OH composite for Bone Regeneration
  • 학술발표[20070507] The effect of interfacial strength on the light refraction in multi-step plastic optical fiber
  • 학술발표[20070413] Antocyanine을 이용한 기능성 PVA 필름 제조
  • 학술발표[20070413] A Study of Nono-Mechanical and Micro-Mechanical Properties of Ethylene Vinyl Acetate
  • 학술발표[20061012] Measurement of new technics On-Line Refractive Index in PMMA Bulk Polymerization for Plastic Optical Fiber
  • 학술발표[20060621] Photo Oxidative Degradation of Lubricants for Data Storage
  • 학술발표[20060507] Structural Development in Solution Casting Optical Polycarbonate Film
  • 학술발표[20050503] Nanomechanical Properties of Viscoelastic Polymers
  • 학술발표[20050313] Preparation and properties of polydimethyl-siloxane nanocomposite containing cadmium selenide nanoparticles
  • 학술발표[20040330] Preparation and Characteristics of Polyorganosiloxane Composite Containing Manganese Zinc Ferrite Powder
  • 학술발표[20030804] A Study of the Rheological Properties of Poly(butylene terephthalate)/Poly(ethylene terephthalate) Blends
  • 학술발표[20030804] Surface Characteristics of Silicon Substrates Coated with Self Assembled Lubricants
  • 학술발표[20030803] On-line Measurement of Structure Formation in Film Blowing Process
  • 학술발표[20021104] A Study on the Isothermal Crystallization of Poly(alkylene terephthalate) Blends
  • 학술발표[20021104] A Study on the Rheological Properties of Poly(ethylene-2,6-naphthalate)/Poly(ethylene terephthalate) Blends
  • 학술발표[20021104] The Characteristics of Rubber-Toughened Poly(phenylene Sulfide) by Polydimethylvinylsiloxane
  • 학술발표[20021104] Effect of Compatibilizers on the Crystallization Behavior of PLLA/PCL Blends
  • 학술발표[20020616] A Study on the Poly(trimethylene terephthalate)/Poly(ethylene terephthalate) Blends
  • 학술발표[20010401] Preparation and Characterization of EPDM/Silicone Blend Using Maleated EPDM-Polydimethysiloxane Copolyimede Compatibilizer
  • 학술발표[20010401] Effect of Thermal Degradation on the Crystallization Behavior of L-Polylactic Acid in Melt Processing
  • 학술발표[20000618] The Effect of the Miscibility on Crystallization Behavior of Poly(ethylene naphthalate)/Poly(ethylene terephthalate) Blends
  • 학술발표[20000618] Tubular Film Extrusion of Metallocene Linear Low Density Polyethylene/Linear Low Density Polyethylene Blends
  • 학술발표[20000507] A Study on the Poly(ethylene naphthalate)/Poly(ethylene terephthalate)-Poly(ethylene naphthalate) Copolymer Blends
  • 학술발표[19990531] Degradation Mechanism of Perfluoropolyether as a Lubricant for Computer Hard Disk
  • 학술발표[19990531] Light Scattering Studies on the Crystallization in Poly(ethylene naphthalate)/Poly(ethylene terephthalate) Blends
  • 학술발표[19980608] The Crystallization Behavior of Poly(L-lactic Acid) in Melt Processing
  • 학술발표[19980608] Effects of the Carbon Fiber Orientation on the EMI Shielding of Epoxy/Carbon Fiber Composites
  • 학술발표[19980427] The Effects of Transesterification on the Properties of Poly(ethylene 2,6-naphthalene dicarboxylate)/Poly(ethylene terephthalate) Blend Films
  • 학술발표[19971026] The Effects of Transesterification on the Basic Properties of Poly(ethylene terephthalate)/Poly(ethylene naphthalate) Blend Fibers
  • 학술발표[19970624] High Performance Acrylic Fiber by In-Situ Spinning Technology
캠퍼스별 교무팀