이해형 사진

이해형 | 대학원 나노바이오의과학과(천) (치의학관, 치과대학병원)

  • 직급:
    교수

교수소개

단국대학교 치과대학을 졸업하고 치과의사로서 활동해오다 치과생체재료의 교육과 연구에 관심을 갖고 일본 Tokushima 치학부 치과이공학교실에 유학하여 박사학위를 취득하였다. 1999년 원광대학교 치대교수로 임용되었으며 2002년 부터는 단국대학교 치대 교수로 부임하여 치의학과 학생의 치과생체재료학 및 실험과 임상치과재료학 및 대학원 강의를 담당하고 있다. 연구면에서는 치과용 세라믹스를 중심으로 치과용 생체재료를 연구하고 있으며, 한국연구재단 등 다수의 연구과제를 수행해왔다. 그간 "치아 수복용 티타늄-세라믹 시스템" "경조직-생체재료 계면특성의 규명" "치과용 지르코니아의 파절강도와 신뢰성" 등에 대한 연구개발을 수행해왔으며, 최근에는 생활성 글라스아이오머 시멘트 및 치과용 흡수성 임플랜트용 생체소재의 개발 및 평가를 연구하고 있다.

학력

  • [1987] 학사 단국대학교 / 치의학
  • [1999] 박사 德島大學 / 치과재료 / 치과생체재료학

주요연구분야

수복용 복합재료
인공치아용 세라믹스 지르코이아/알루미나
임플랜트용 금속, 생체세라믹스
치과용 생체재료

컨설팅 가능 분야

치과용 세라믹스, 컴포짓트 수복재의 개발, 임플랜트 소재 응용

연구업적

  • 연구보고서[20091224] 외국 치과의사 국가시험 문항관리분석 연구
  • 연구보고서[20050901] 치과용 티타늄-포세린 심미 보철물의 결합강화 시스템 개발
  • 연구보고서[20031030] 나노미터 크기의 지르코니아 분말을 이용한 치과용 브리지의 개발
  • 연구보고서[20030510] 미소압입시험법을 이용한 치과영역에서 경조직-생체재료 계면특성의 규명
  • 일반논문[20230301] Delivery of Induced Neural Stem Cells Through Mechano-Tuned Silk-Collagen Hydrogels for the Recovery of Contused Spinal Cord in Rats
  • 일반논문[20230201] Materials and extracellular matrix rigidity highlighted in tissue damages and diseases: Implication for biomaterials design and therapeutic targets
  • 일반논문[20230101] A comprehensive review: Physical, mechanical, and tribological characterization of dental resin composite materials
  • 일반논문[20221101] The Potential Application of Human Gingival Fibroblast-Conditioned Media in Pulp Regeneration: An In Vitro Study
  • 일반논문[20221101] Effect of alumina particulate and E-glass fiber reinforced epoxy composite on erosion wear behavior using Taguchi orthogonal array
  • 일반논문[20221001] Premixed Calcium Silicate-Based Root Canal Sealer Reinforced with Bioactive Glass Nanoparticles to Improve Biological Properties
  • 일반논문[20221001] Matrix-enabled mechanobiological modulation of osteoimmunology
  • 일반논문[20221001] Chemically-induced osteogenic cells for bone tissue engineering and disease modeling
  • 일반논문[20220901] Hyperelastic, shape-memorable, and ultra-cell-adhesive degradable polycaprolactone-polyurethane copolymer for tissue regeneration
  • 일반논문[20220801] Photocatalytic effect-assisted antimicrobial activities of acrylic resin incorporating zinc oxide nanoflakes
  • 일반논문[20220701] Fabrication, characterization, and selection using FAHP-TOPSIS technique of zirconia, titanium oxide, and marble dust powder filled dental restorative composite materials
  • 일반논문[20220701] Characterization of Physical and Biological Properties of a Caries-Arresting Liquid Containing Copper Doped Bioglass Nanoparticles
  • 일반논문[20220701] Ranking and selection of dental restorative composite materials using FAHP-FTOPSIS technique: An application of multi criteria decision making technique
  • 일반논문[20220501] Investigating the Effects of Conditioned Media from Stem Cells of Human Exfoliated Deciduous Teeth on Dental Pulp Stem Cells
  • 일반논문[20220501] Improvement of Biological Effects of Root-Filling Materials for Primary Teeth by Incorporating Sodium Iodide
  • 일반논문[20220201] Investigating the mechanophysical and biological characteristics of therapeutic dental cement incorporating copper doped bioglass nanoparticles
  • 일반논문[20210801] Electricity auto-generating skin patch promotes wound healing process by activation of mechanosensitive ion channels
  • 일반논문[20210701] Selenium Nanoparticles as Candidates for Antibacterial Substitutes and Supplements against Multidrug-Resistant Bacteria
  • 일반논문[20210618] Grapefruit Seed Extract as a Natural Derived Antibacterial Substance against Multidrug-Resistant Bacteria
  • 일반논문[20210501] Digital image correlation in dental materials and related research: A review
  • 일반논문[20210501] Emerging biogenesis technologies of extracellular vesicles for tissue regenerative therapeutics
  • 일반논문[20210301] Influence of Sequential CAD/CAM Milling on the Fitting Accuracy of Titanium Three-Unit Fixed Dental Prostheses
  • 일반논문[20210227] Calcium Silicate-Based Biocompatible Light-Curable Dental Material for Dental Pulpal Complex
  • 일반논문[20210201] The Effect of Selenium Nanoparticles on the Osteogenic Differentiation of MC3T3-E1 Cells
  • 일반논문[20210101] Antibacterial, proangiogenic, and osteopromotive nanoglass paste coordinates regenerative process following bacterial infection in hard tissue
  • 일반논문[20200701] Biological Effects of Tricalcium Silicate Nanoparticle-Containing Cement on Stem Cells from Human Exfoliated Deciduous Teeth
  • 일반논문[20200701] Mechanophysical and biological properties of a 3D-printed titanium alloy for dental applications
  • 일반논문[20200101] Development of Bis-GMA-free biopolymer to avoid estrogenicity
  • 일반논문[20200101] Nano-graphene oxide/polyurethane nanofibers: mechanically flexible and myogenic stimulating matrix for skeletal tissue engineering
  • 일반논문[20191201] Characterization of an anti-foaming and fast-setting gypsum for dental stone
  • 일반논문[20191201] Gallium phosphate glass (GPG)를 첨가한 글라스아이오노머 시멘트의 기계적 성질과항균효과
  • 일반논문[20191101] 다양한 레진 의치상의 적합도와 기계적 특성
  • 일반논문[20191001] Depth-Dependent Cellular Response from Dental Bulk-Fill Resins in Human Dental Pulp Stem Cells
  • 일반논문[20190901] Ceria-incorporated MTA for accelerating odontoblastic differentiation via ROS downregulation
  • 일반논문[20190701] Performance of a glucose-reactive enzyme-based biofuel cell system for biomedical applications
  • 일반논문[20190320] Carbon nanotube incorporation in PMMA to prevent microbial adhesion
  • 일반논문[20190301] Role of nuclear mechanosensitivity in determining cellular responses to forces and biomaterials
  • 일반논문[20190201] Uniaxial/biaxial flexure strengths and elastic properties of resin-composite block materials for CAD/CAM
  • 일반논문[20190101] Dual-ion delivery for synergistic angiogenesis and bactericidal capacity with silica-based microsphere
  • 일반논문[20181130] Evaluation of the flexural mechanical properties of various thermoplastic denture base polymers
  • 일반논문[20181101] Mechanical properties of hybrid computer-aided design/computer-aided manufacturing (CAD/CAM) materials after aging treatments
  • 일반논문[20181031] Auditory disorders and future therapies with delivery systems
  • 일반논문[20181030] Reformulated mineral trioxide aggregate components and the assessments for use as future dental regenerative cements
  • 일반논문[20181001] Evaluation of mold-enclosed shear bond strength between zirconia core and porcelain veneer
  • 일반논문[20180501] Intra-articular biomaterials-assisted delivery to treat temporomandibular joint disorders
  • 일반논문[20180401] Nano-graphene oxide incorporated into PMMA resin to prevent microbial adhesion
  • 일반논문[20180401] Multi-functional nano-adhesive releasing therapeutic ions for MMP-deactivation and remineralization
  • 일반논문[20180301] Silk fibroin/collagen protein hybrid cell-encapsulating hydrogels with tunable gelation and improved physical and biological properties
  • 일반논문[20180101] Zirconia-incorporated zinc oxide eugenol has improved mechanical properties and cytocompatibility with human dental pulp stem cells
  • 일반논문[20171201] Investigation of the cytotoxicity of thermoplastic denture base resins
  • 일반논문[20171101] 구강조직유래 유도만능줄기세포- 생체재료 복합체의 재생의료 동향
  • 일반논문[20171001] Rechargeable microbial anti-adhesive polymethyl methacrylate incorporating silver sulfadiazine-loaded mesoporous silica nanocarriers
  • 일반논문[20171001] Cytotoxicity and proinflammatory cytokine expression induced by interim resin materials in primary cultured human dental pulp cells
  • 일반논문[20171001] 치과용 복합레진의 굽힘 특성과 시험 신뢰도에 미치는 시편 크기의 영향
  • 일반논문[20171001] Drug/ion co-delivery multi-functional nanocarrier to regenerate infected tissue defect
  • 일반논문[20170701] Sol-gel-derived bioactive glass nanoparticle-incorporated glass ionomer cement with or without chitosan for enhanced mechanical and biomineralization properties
  • 일반논문[20170301] 저/고분자량 키토산에 의한 종래형 치과용 글라스아이오노머 시멘트의 강화
  • 일반논문[20170301] Biological Effects of Provisional Resin Materials on Human Dental Pulp Stem Cells
  • 일반논문[20170201] Xerogel Interfaced Nanofibers Stimulate Bone Regeneration Through the Activation of Integrin and Bone Morphogenetic Protein Pathways
  • 일반논문[20170101] Immunomodulatory/anti-inflammatory effect of ZOE-based dental materials
  • 일반논문[20161201] Development of long-term antimicrobial poly(methyl methacrylate) by incorporating mesoporous silica nanocarriers
  • 일반논문[20161101] 치과용 티타늄 임플란트의 골융합 증진을 위한체어사이드 친수성 표면처리방법
  • 일반논문[20161101] Magnetic nanofiber scaffold-induced stimulation of odontogenesis and pro-angiogenesis of human dental pulp cells through Wnt/MAPK/NF-kappa B pathways
  • 일반논문[20160901] Evaluation of Light-Activated Provisional Resin Materials for Periodontal Soft Tissue Management
  • 일반논문[20160630] 치과 CAD/CAM용 크롬-코발트 연질 금속블록으로 제작한 3-unit 브리지의 변연 적합도
  • 일반논문[20160601] Delivery of dexamethasone from bioactive nanofiber matrices stimulates odontogenesis of human dental pulp cells through integrin/BMP/mTOR signaling pathways
  • 일반논문[20160501] Technique for fabricating individualized dentures with a gingiva-shade composite resin
  • 일반논문[20160501] Cytotoxicity and anti-inflammatory effects of zinc ions and eugenol during setting of ZOE in immortalized human oral keratinocytes grown as three-dimensional spheroids
  • 일반논문[20160401] 탄소나노튜브 첨가에 의한 치과용 글라스아이오노머 시멘트의 기계적 특성
  • 일반논문[20160301] Influence of ZrO2 oxide on the properties and crystallization of calcium fluoro-alumino-silicate glasses
  • 일반논문[20150901] Magnetic Nanocomposite Scaffold-Induced Stimulation of Migration and Odontogenesis of Human Dental Pulp Cells through Integrin Signaling Pathways
  • 일반논문[20150901] 치과 보철/수복재료의 기계적 특성에 대한 규격화 시험법과 응용
  • 일반논문[20150701] Biological and mechanical properties of an experimental glass-ionomer cement modified by partial replacement of CaO with MgO or ZnO
  • 일반논문[20141201] Advanced Biomatrix Designs for Regenerative Therapy of Periodontal Tissues
  • 일반논문[20141201] 3D 프린터법으로 제작한 브리지 패턴의 내면 적합도
  • 일반논문[20141201] 치과용 아크릴 의치상 레진의 연마 방법에 따른 표면조도와 광택도
  • 일반논문[20140930] 압입 하중과 침적 기간에 따른 의치상용 레진의 비커스 경도
  • 일반논문[20140901] Development of a novel aluminum-free glass ionomer cement based on magnesium/strontium-silicate glasses
  • 일반논문[20140901] Degradation in the fatigue strength of dentin by cutting, etching and adhesive bonding
  • 일반논문[20131230] 중합방법이 의치상용 레진의 이축 굽힘 강도에 미치는 영향
  • 일반논문[20130930] 임플란트 표면처리 기술: 마이크로 아크 산화법과 그 응용
  • 일반논문[20130101] Investigation of the correlation between the different mechanical properties of resin composites
  • 일반논문[20121003] Chitosan-nanobioactive glass electrophoretic coatings with bone regenerative and drug delivering potential
  • 일반논문[20120930] 티타니아 나노섬유 첨가에 의한 치과용 글라스아이오노머 시멘트의 강화
  • 일반논문[20120901] Porosity of dental phosphate-bonded investments after setting and heating processes
  • 일반논문[20120201] Porosity of dental gypsum-bonded investments in setting and heating process
  • 일반논문[20120121] Correlation in the mechanical properties of acrylic denture base resins
  • 일반논문[20111001] Improvement of surface bioactivity of poly(lactic acid) biopolymer by sandblasting with hydroxyapatite bioceramic
  • 일반논문[20110930] 금속의 표면처리가 다양한 치과용 비귀금속-세라믹 시스템의 결합강도에 미치는 영향
  • 일반논문[20110801] Biomedical nanocomposites of poly(lactic acid) and calcium phosphate hybridized with modified carbon nanotubes for hard tissue implants
  • 일반논문[20110530] 최근 치과용 지르코니아 CAD/CAM 수복물의 임상적 고찰
  • 일반논문[20110131] Highly Homogeneous Carbon Nanotube-Polycaprolactone Composites with Various and Controllable Concentrations of Ionically-Modified-MWCNTs
  • 일반논문[20110101] Preparation of hydroxyapatite-carbon nanotube composite nanopowders
  • 일반논문[20100915] Bone regeneration by bioactive hybrid membrane containing FGF2 within rat calvarium
  • 일반논문[20100801] Bone Cell Responses of Titanium Blasted with Bioactive Glass Particles
  • 일반논문[20100731] Comparative adaptation accuracy of acrylic denture bases evaluated by two different methods
  • 일반논문[20091231] 두 연마시스템에 의한 치과용 포세린의 표면조도 평가
  • 일반논문[20090227] 치과 보철수복용 생체재료
  • 일반논문[20081031] Surface Coatings to Enhance Bonding Strength of Dental Titanium-ceramic restorative System
  • 일반논문[20081001] Nanofibrous matrices of poly(lactic acid) and gelatin polymeric blends for the improvement of cellular responses
  • 일반논문[20081001] Bioactive sol-gel glass added ionomer cement for the regeneration of tooth structure
  • 일반논문[20080901] Preparation of hydroxyapatite spheres with an internal cavity as a scaffold for hard tissue regeneration
  • 일반논문[20080630] Thermocycling 후 복합레진의 기계적 성질 변화
  • 일반논문[20080601] Nanofibrous Glass Tailored with Apatite-Fibronectin Interface for Bone Cell Stimulation
  • 일반논문[20080601] Bioactivity and osteoblast responses of novel biomedical nanocomposites of bioactive glass nanofiber filled poly(lactic acid).
  • 일반논문[20080501] Bone Formation on the Apatite-Coated Zirconia Porous Scaffolds within a Rabbit Calvarial Defect
  • 일반논문[20080501] Bioactivity improvement of poly(ε-caprolactone) membrane with the addition of nanofibrous bioactive glass
  • 일반논문[20080101] Effect of hydroxyapatite-coated nanofibrous membrane on the responses of human periodontal ligament fibroblast
  • 일반논문[20070630] 전부도재수복물을 위한 유색 및 무색 지르코니아 세라믹의 굴곡강도
  • 일반논문[20070501] Microspheres of collagen-apatite nanocomposites with osteogenic potential for tissue engineering
  • 일반논문[20061201] Electrospinning biomedical nanocomposite fibers of hydroxyapatite/poly(lactic acid) for bone regeneration
  • 일반논문[20060630] 여러 가지 광원에 의하여 중합된 치과용 콤포짓트 레진의 바콜 경도
  • 일반논문[20050630] 수종의 치과용 금속-세라믹 수복 시스템들의 결합강도 - II. 금속-세라믹 치관에서의 파절강도
  • 일반논문[20050331] 수종의 치과용 금속-세라믹 수복 시스템들의 결합강도 - I. ISO 결합강도 비교
  • 일반논문[20050228] Microstructures and mechanical properties of pressureless and spark plasma sintered ZrO2 bodies
  • 일반논문[20041230] 광도변화가 광중합형 컴포머와 컴포짓트 레진의 중합도 및 불소 유출에 주는 영향
  • 일반논문[20040430] SPS에 의해 제조된 HAp-Ag, HAp-ZrO₂복합체의 미세조직 및 기계적 특성
  • 일반논문[20040228] 치과용 열가압 글라스 세라믹스의 기계적 성질과 미세구조
  • 일반논문[20031231] 치과용 포세린에서 루사이트 입자와 글라스 기질의 미세경도 및 탄성계수
  • 일반논문[20030630] 미소압입시험법과 SEM/EPMA를 이용한 치과용 금속-세라믹 시스템의 계면특성 연구
  • 일반논문[20030430] Sol-Gel법에 의한 Yttria-Stabilized Zirconia (YSZ) 나노분말의 제조
  • 일반논문[20021231] Sol-Gel법에 의해 제조된 Zirconia 나노분말의 결정상과 기공특성
  • 일반논문[20021230] 치과용 초경석고의 혼합수에 따른 경화특성과 압축강도
  • 일반논문[20020330] 다이용 석고재료의 경화 특성
  • 일반논문[20020302] A study on the fracture strength of implant-supported restorations using milled ceramic abutments and all-ceramic crowns
  • 저서/역서[20110228] 생체재료과학
  • 저서/역서[20090320] 치과재료학 실습지침서
  • 저서/역서[20080301] 치과재료학(5판)
  • 저서/역서[20060225] 치과재료학(4판)
  • 지식재산권[20170124] 은이온 방출 및 재담침이 가능한 중기공 실리카 나노입자 함유 아크릴 레
  • 지식재산권[20150611] 알루미늄 성분이 없는 생체활성 글라스아이오노머 시멘트용 글라스 분말 조성물(Glass powder composition for aluminum-free bioactive glassionomer cement)
  • 지식재산권[20131105] 알루미늄 성분이 없는 생체활성 글라스아이오노머 시멘트용 글라스 분
  • 지식재산권[20130910] 개질 CNT가 흡착된 인산칼슘 나노입자 및 생분해성 고분자를 포함하는 나노복합체, 및 이의 제조방법
  • 지식재산권[20120626] 흡수성 재료 및 이를 이용한 식립체, 임플란트(absorbable material, absorbable fixture and implant using the same)
  • 지식재산권[20120405] 고분자/CNT 복합체 및 이의 제조방법(POLYMER/CARBON NANOTUBE COMPOSITE AND PREPARING METHOD THEREOF)
  • 지식재산권[20120327] 세라믹/CNT 복합체 및 이의 제조방법(CERAMIC/CARBON NANOTUBE COMPOSITE AND PREPARING METHOD THEREOF)
  • 지식재산권[20110715] 생체 세라믹을 내포하는 의료용 고분자 및 이의 제조방법
  • 지식재산권[20100830] 생체유리 입자 분사법에 의한 티타늄 임플란트의 표면 개질방법 (Surface modification of titanium implant by blasting with bioactive glass particles using the same)
  • 지식재산권[20100414] 세라믹/CNT 복합체 및 이의 제조방법
  • 지식재산권[20091106] 고분자/CNT 복합체 및 이의 제조방법
  • 지식재산권[20090923] 생체유리 입자 분사법에 의한 티타늄 임플란트의 표면 개질방법
  • 학술발표[20141107] 다중 약물 방출을 위한 나노복합 섬유 지지체 제조
  • 학술발표[20141107] 줄기세포 자극을 위한 SDF1 함유 하이브리드 지지체
  • 학술발표[20141107] 섬유상 내부 구조를 갖는 나노복합 스캐폴드
  • 학술발표[20141107] 성장인자의 서방출을 위한 나노구 함유 3차원 지지체
  • 학술발표[20141107] 치과용 아크릴 의치상 레진의 연마 방법에 따른 표면조도와 광택도
  • 학술발표[20141107] 콜라젠-알지네이트 섬유형 하이드로젤을 이용한 골조직공학
  • 학술발표[20140425] 다양한 유연성(Flexible) 의치상 재료들의 굽힘 특성
  • 학술발표[20140425] 치과용 벌크필 복합레진 수복재의 굽힘 강도와 신뢰성
  • 학술발표[20140425] 교정용 자가 중합 레진의 분액비와 열처리 온도가 기계적 특성에 미치는 영향
  • 학술발표[20140425] 삼차원 프린팅으로 제작한 고정성 치과 수복물의 적합도
  • 학술발표[20131122] 치과용 복합레진의 기계적 특성과 필러 함유량의 상관성
  • 학술발표[20131122] 중합방법이 의치상용 아크릴 레진의 굽힘 강도에 미치는 영향
  • 학술발표[20131012] Effects of etching and application of adhesive to the fatigue strength of dentin
  • 학술발표[20130323] Accelerated Fatigue of Dentin Resulting From Lactic Acid Solutions
  • 학술발표[20130322] Effect of Filler Fraction on Poisson’s Ratio of Resin Composites
  • 학술발표[20121123] VEGF 서방형 신규 생체고분자 스캐폴드 개발과 조직반응
  • 학술발표[20121123] 기계적 성질을 강화한 글라스아이오노머 시멘트의 제조 및 특성
  • 학술발표[20120414] Effects of bioactive sol-gel glass nanoparticle addition to conventional glass-ionomer cement
  • 학술발표[20120414] Effect of steam autoclaving on the mechanical properties of PLLA-TCP composite biomaterials
  • 학술발표[20111118] Gallium 함유 phosphate glass 첨가의 글라스아이오노머 시멘트 강화 및 항균효과
  • 학술발표[20111118] 마이크로파로 소결한 지르코니아 세라믹의 입도와 파괴인성
  • 학술발표[20111118] PMMA 재료의 하중속도에 따른 굽힘강도 평가
  • 학술발표[20110529] Effect of Chitosan Addition on the Mechanical Properties of Glass Ionomer Cement.
  • 학술발표[20110529] Annealing Effect on the Mechanical Behavior of PLA/TCP Composite.
  • 학술발표[20110529] Flexure Strengths of Acrylic Denture Eesins Measured by Ring-on-Ring Biaxial Test.
  • 학술발표[20110528] Porosity of Dental Gypsum Products during Setting and Heating Process
  • 학술발표[20110528] Fracture Resistance of Ceramic MOD Inlays Machined from Three Dental CAD-CAM Ceramics.
  • 학술발표[20110528] Fracure Toughness of 3Y-YZP Ceramics Sintered by Microwave Furnace.
  • 학술발표[20110319] Factors Affect Fracture Resistance of Three-unit Zirconia Posterior Bridge.
  • 학술발표[20110318] Mechanical Properties of Melt-Injected PLLA-TCP Composites.
  • 학술발표[20110318] Ring-on-ring Biaxial Flexure Strength of Acrylic Denture Base Resin.
  • 학술발표[20101119] 치과용 기계가공 세라믹의 굽힘강도와 파절 저항성
  • 학술발표[20101119] 티타늄 나노섬유 첨가에 따른 글라스아이오노머 시멘트의 기계적 성질
  • 학술발표[20101010] Influence of surface finish methods on color and gloss of dental porcelains
  • 학술발표[20100715] flexure strength of dental zirconia ceramic tested by various methods
  • 학술발표[20100626] 치과용 지르코니아 세라믹의 물성과 임상적용
  • 학술발표[20100423] 아크릴 의치상레진의 Ring-on-ring 이축강도 평가
  • 학술발표[20100423] 수작업과 CAD-CAM 가공에 의한 브릿지 왁스 패턴의 적합도
  • 학술발표[20100423] 치과용 포세린의 포면처리에 따른 색변화와 광택도
  • 학술발표[20090313] Bioactive composite membrane useful for guiding bone regeneration in periodontology
  • 학술발표[20081128] 지르코니아 구치부 브리지의 파절저항성과 신뢰성
  • 학술발표[20081107] Comparative fracture resistance of colored and uncolored zirconia mandibular 3-unit fixed partial denture
  • 학술발표[20080529] Mesenchymal Stem Cell Behaviors on Bioactive Collagen Foams Hybridized with Nanofibrous Component
  • 학술발표[20080501] 주입-성형법에 의하여 제작된 의치상 레진의 적합도 평가
  • 학술발표[20080427] Surface treatments on titanium to enhance titanium-porcelain bonding
  • 학술발표[20080426] Microplotted biomedical composite scaffolds and the initial cultivation of stem cells
  • 학술발표[20071130] 생체유리 분사법에 의한 티타늄의 표면 개질
  • 학술발표[20071130] 아파타이트 표면개질을 통한 고분자 나노섬유의 골세포 반응 증진
  • 학술발표[20071130] Robotic Dispensing법을 이용한 3차원 생체 나노복합 스케폴드의 제조
  • 학술발표[20071121] Comparative study on three- and four-point flexure bond test for dental metal-ceramic system
  • 학술발표[20071121] Bioactive Glass Ionomer Cements for the Tooth Regeneration Area
  • 학술발표[20070605] Effect of platinum on titanium-porcelain bonding strength
  • 학술발표[20070605] Blasting titanium surface with bioglass and the effects on cell responses
  • 학술발표[20070605] Solution-based co-deposition of apatite with poly(glutamic acid) on titanium
  • 학술발표[20070417] Production of degradable microcarriers with pore channels for the skelectal treatment
  • 학술발표[20061020] Bone cell stimulation in the fluorapatite and degradable polymer tissue regeneration membrane
  • 학술발표[20060821] BIOACTIVE HYBRIDIZED NANOFIBERS FOR BONE MATRIX
  • 학술발표[20060310] Tensile Bond Strength of the Anodized Oxide Films on Titanium
  • 학술발표[20060309] R-Curve Behavior of a New Veneering Ceramic
  • 학술발표[20050311] In-vitro Fracture Strength of All-Ceramic and Metal-Ceramic Posterior FPDs
  • 학술발표[20040311] Flexure Strength of Lithium Disilicate Ceramic in Rod Specimen
  • 학술발표[20031118] Microstructures and mechanical properties of HAp-Ag and HAP-ZrO2 composites prepared by SPS
  • 학술발표[20030625] Fracture strength of bilayered zirconia/porcelain disk under biaxial loading
  • 학술발표[20030624] Hardness and elastic modulus of leucite particle and glass matrix in dental porcelain
  • 학술발표[20020306] As-fired strength of Y-TZP ceramic machined at presintered state
캠퍼스별 교무팀