이동현 사진

이동현 | 공과대학 고분자시스템공학부 (제3공학관)

  • 직급:
    교수

교수소개

2001년 단국대학교 고분자공학과를 졸업하고 2003년에 POSTECH(포항공과대학교) 화학공학과에서 석사 학위를 받았으며, 2008년 POSTECH(포항공과대학교) 화학공학과에서 박사 학위를 취득하였다. 학위과정 중 고분자 블랜드 및 블록공중합체의 합성과 상분리 거동에 관한 연구를 수행하였다. 2008년 미국 Univeristy of Massachusetts, Amherst의 Polymer Science and Engineering Department에서 박사 후 연수과정을 거친 뒤, 2010년 University of California, Berkeley와 Lawrence Berkeley National Lab에서 박사 후 연수과정을 하였다. 박사 후 연수과정 중 자가조립특성(Self-Assembly), 무기나노입자 및 하이브리드 소재 및 반도체 나노패턴화에 관한 연구를 수행하였다. 2011년 본교 고분자시스템공학과 교수로 취임하였다.

학력

  • [2001] 학사 단국대학교 / 고분자공학과
  • [2003] 석사 포항공과대학교 / 화학공학과 / 고분자의 자기조립특성
  • [2008] 박사 포항공과대학교 / 화학공학과 / 고분자 자기조립특성

주요연구분야

고분자 박막 필름에서 광대역 나노패턴 제조
고분자 상거동 분석 및 제어
블록공중합체를 이용한 나노 구조 설계 및 제조
유기/무기 하이브리드 물질 개발
반도체 나노패턴화
고분자 자가치유소재
3D 프린팅 소재

컨설팅 가능 분야

고분자 나노 구조 설계 및 제어
자가조립특성
유기/무기 하이브리드 물질
블록공중합체 및 고분자 블렌드
반도체 나노패턴화

연구업적

  • 일반논문[20230401] 3D printing of micropatterned stamps with tunable horizontal surface properties
  • 일반논문[20220922] Self-Assembly of Gold Nanoparticles Induced by Soft Topographical Patterns
  • 일반논문[20220915] Trifluoromethyl ketone P3HT-CNT composites for chemiresistive amine sensors with improved sensitivity
  • 일반논문[20220105] Synthesis of Crosslinkable Polyetherimide and Application as an Additive in 3D Printing of Photopolymers
  • 일반논문[20211231] Additive Manufacturing of a Micropatterned Stamp for Transfer Printing of Quantum Dots
  • 일반논문[20190916] Stability and Electrical Conductivity of Copper-based Solid-state Conductive Inks and Their Application for Flexible Electrodes
  • 일반논문[20190801] Directed Self-Assembly of Colloidal Quantum Dots Using Well-Ordered Nanoporous Templates for Three-Colored Nanopixel Light-Emitting Diodes
  • 일반논문[20181125] Effect of Homo Polypropylene Having Low Melt Viscosity on Processing Characteristics and Structural Development of Random Polypropylene Films
  • 일반논문[20180925] Effect of Laser Scanning Speed on the Formation of Sintered Layer in SLS 3-D Printing
  • 일반논문[20180225] Fabrication of Grid-Type Transparent Conducting Electrodes Based on Controlled Mechanical Fracture
  • 일반논문[20180201] Directed Self-Assembly of Asymmetric Block Copolymers in Thin Films Driven by Uniaxially Aligned Topographic Patterns
  • 일반논문[20171125] Enhancement of Impact Strength in Acrylate with Siloxane for SLA 3-D Printing
  • 일반논문[20170925] Effect of Crystallization Behavior on Processing Characteristics of SLS 3-D Printing
  • 일반논문[20170525] Fabrication of Poly(ether imide) Microspheres for Selective Laser Sintering (SLS) 3D Printing Process
  • 일반논문[20170101] Polymer Powder Sintering by CO2 Laser for 3D Printing
  • 일반논문[20160517] Flexible conducting electrodes based on an embedded double-layer structure of gold ribbons and silver nanowires
  • 일반논문[20160202] Plasmonic Nanostructures based on Block Copolymer Templates for Efficient Organic Solar Cells
  • 일반논문[20151209] Simultaneous Thermoelectric Property Measurement and Incoherent Phonon Transport in Holey Silicon
  • 일반논문[20151105] Directed Self-Assembly of Block Copolymer Micelles onto Topographically Patterned Surface
  • 일반논문[20150825] Directed assembly of suspended nanowires assisted by topographically patterned surfaces of n-paraffin
  • 일반논문[20140525] Enthalpic and Volumetric Changes at Phase Transitions of Polystyrene-b-poly(alkyl methacrylate) Copolymers and Their Pressure Dependence
  • 일반논문[20140514] Direct 3-D Nanoparticle Assemblies in Thin Films via Topographically Patterned Surfaces
  • 일반논문[20130904] Two-Dimensional Micropatterning via Crystal Growth of Na2CO3 for Fabrication of Transparent Electrodes
  • 일반논문[20121001] Ordering evolution of block copolymer thin films upon solvent-annealing process
  • 일반논문[20120910] Fabrication of Silica Mesh Patterns via Self-Assembly of Block Copolymers
  • 일반논문[20120816] Controlled Orientation of Block Copolymers on Defect-Free Faceted Surfaces
  • 일반논문[20120725] 용매 어닐링에 의한 박막에서 Polystyrene-Poly(1,4-butadiene) 블록공중합체의 모폴로지 전이
  • 일반논문[20110914] Defining the Nanostructured Morphology of Triblock Copolymers Using Resonant Soft X-ray Scattering
  • 일반논문[20110201] Highly Ordered Nanoporous Template from Triblock Copolymer
  • 일반논문[20101116] Temperature Tunable Micellization of Polystyrene-block-poly(2-vinylpyridine) at Si-Ionic Liquid Interface
  • 일반논문[20101001] Holey Silicon as an Efficient Thermoelectric Material
  • 일반논문[20101001] Self-Assembly of Block Copolymers on Flexible Substrates
  • 일반논문[20100901] Segmental dynamics of polymers during capillary flow into nanopores
  • 일반논문[20091101] POLYMERS Performing under pressure
  • 일반논문[20090501] Core-shell polymeric nanorods prepared from reactive polymer bilayer via sequential complete wetting
  • 일반논문[20090401] Block-Copolymer-Based Plasmonic Nanostructures
  • 일반논문[20090324] Ion-dipole interaction in the dispersion of organoclay nanocomposites based on polystyrene-block-poly(2-vinylpyridine) copolymer
  • 일반논문[20090301] Macroscopic 10-Terabit-per-Square- Inch Arrays from Block Copolymers with Lateral Order
  • 일반논문[20080314] Phase Behavior of Polystyrene-block-Poly(4-vinylpyridine) Copolymers coordinated by Metal Chloride
  • 저서/역서[20130228] Introduction To Polymers
  • 지식재산권[20190128] 양자점 발광다이오드 및 그 제조방법
  • 지식재산권[20180228] 연성재질을 이용한 나노 규칙 패턴 구조체 및 이의 제조방법(NANO UNIFORM PATTERN STRUCTURE USING SOFT MATERIAL AND METHOD OF MANUFACTURING THE SAME)
  • 지식재산권[20180212] 금속 나노입자의 규칙배열 형성방법(Method of Forming Regular Array of Metal Nanoparticles)
  • 지식재산권[20171108] 양자점 발광 다이오드 및 그 제조 방법
  • 지식재산권[20160705] 연성재질을 이용한 나노 규칙 패턴 구조체 및 이의 제조방법
  • 지식재산권[20150622] 금속 나노입자의 규칙배열 형성방법
  • 지식재산권[20150306] 미세구조 제조방법 및 그에 의해 제조된 전극구조
  • 지식재산권[20140528] 미세구조 제조방법 및 그에 의해 제조된 미세구조
  • 지식재산권[20130528] 금속 전극의 제조방법
  • 지식재산권[20130318] 금속 전극의 제조방법
  • 학술발표[20131011] Controlled Positioning of Nanoparticles on Nano-patterned Surface
  • 학술발표[20130412] Fabrication of Micropatterns based on Organic Salt Crystals toward Transparent Electrodes
  • 학술발표[20130320] Fabrication of Micropatterns using Salt Crystals from Solvent Evaporation
캠퍼스별 교무팀